HOME  

   

แท็กยอดนิยม  

   

โพสต์เก่า  

   

คลังเนื้อหา  

   

KNOWLEDGE  

   

โพสต์ส่วนใหญ่ที่อ่าน  

   
   

Programmable Controllers

Our control solutions set the standard — from the original programmable logic controller (PLC) invented in the 1970s to the technology embodied in the scalable, multi-disciplined and information-enabled programmable automation controller (PAC). Our safety-certified controllers support your SIL 2 and SIL 3 application needs. We offer multiple controller types and sizes to fit your specific needs.

Large Control Systems

Large Control Systems

Our ControlLogix® control systems use a common control engine with a common development environment to provide high performance in an easy-to-use environment. Tight integration between the programming software, controller, and I/O modules reduces development time and cost at commissioning and during normal operation. You can perform standard and safety control in the same chassis for a truly integrated system. Leverage the high-availability and extreme environment capabilities to meet your application needs.

ControlLogix Modules

Our Bulletin 1756 ControlLogix® chassis-based modules provide a full range of digital, diagnostic digital, analog, motion control, specialty I/O, and compute modules to meet your application needs. You can use any of the chassis-based modules in the local chassis of a ControlLogix controller or in a chassis linked to a ControlLogix controller across ControlNet™ or EtherNet/IP™ networks.

Features

  • Mounts in a ControlLogix® chassis
  • Requires either a removable terminal block (RTB) or a Bulletin 1492 wiring interface module (IFM) to connect all field-side wiring
  • Includes inherent time-stamping capabilities for sequence of events (SOE) applications
  • Offers comprehensive I/O diagnostics for detection of both system and field-side failures
  • Provides removal and insertion under power (RIUP) for ease of maintenance
  • Offers electronic keying to help prevent replacement errors
  • Includes I/O wizards in the Studio 5000 Logix Designer® application to enable quick and easy module configuration

1756 ControlLogix Digital I/O Modules

  • Offers a variety of voltages
  • Provides 8 to 32 points per module
  • Offers isolated and non-isolated module types
  • Includes point-level output fault states
  • Offers direct-connect or rack-optimized communication
  • Offers field-side diagnostics on select modules

1756 ControlLogix Analog I/O Modules

  • Includes input, output, and combination modules
  • Provides thermocouple and RTD modules
  • Includes on-board data alarming
  • Offers scaling to engineering units
  • Provides real-time channel sampling
  • Offers electronic module keying, and is software configurable
  • Includes mechanical RTB keying, user-defined
  • Offers per channel configuration for voltage, current or 2-wire transmitter current sourcing
  • Offers Per channel configuration for either RTD or Thermocouple
  • As of March 31, 2017, the ControlLogix 1756 Isolated Analog I/O 6-channel modules will be discontinued and no longer available for sale. Customers are encouraged to migrate to the 1756 Isolated Analog I/O 8-channel modules using the Migrating 6-channel to 8-channel 1756 Analog Modules Migration Guide

1756 ControlLogix Specialty I/O Modules

  • Includes configurable flow meter modules
  • Provides high-speed counter modules
  • Offers programmable limit switch modules

1756 ControlLogix Removable Terminal Blocks (RTBs)

  • Provides a flexible interconnection between plant wiring and I/O modules
  • Includes screw-clamp or spring-clamp terminations
  • Not shipped with I/O modules; you must order separately

1756 HART Analog Isolated I/O Modules

  • Includes channel-to-channel isolation
  • Offers HART modem per channel for faster HART data update
  • Offers basic field device configuration via the Add-on Profile
  • Helps eliminate the need for field isolating barriers when using isolated modules
  • Offers 8- or 16-channel density modules

1756 Enhanced Analog I/O Modules

  • Offers increased accuracy, repeatability, stability, and precision
  • Includes isolated 8-channel and non-isolated 12- and 16-channel modules with stability over the entire temperature operating range
  • Does not require field calibration
  • Offers advanced precision using 24-bit design
  • Includes per channel status and fault LED annunciation
  • Offers SIL 1, systematic capability 2, type certified for use in a ControlLogix SIL 2 architecture
  • Offers an emulation mode that helps enable customers to migrate from 6-channel applications

1756 Communications Modules

  • Implements network-based access control for users, devices, and networks in the 1756 chassis
  • Offers security modules to encrypt important information shared between controllers and servers to prevent tampering

1756 Compute Module

  • Provides high-speed access to the ControlLogix controller over the backplane
  • Integrated DisplayPort™ for direct connection to a high-definition 5100 industrial monitor
  • Provides computing capability in a ControlLogix chassis

DOWNLOAD BROCHURES


CompactLogix Control Systems

Our CompactLogix™ and Compact GuardLogix® controllers use a common control engine with a common development environment to provide mid-range application control in an easy-to-use environment. Tight integration between the programming software, controller and I/O modules reduces development time and cost at commissioning and during normal operation. This commonality provides cost-effective integration of a machine or safety application into a plant-wide control system because it integrates safety, motion, discrete and drive capabilities in a single controller.

Bulletin 1769 CompactLogix 5370 Programmable Automation Controllers

Our Bulletin 1769 CompactLogix™ 5370 Controllers are part of the Integrated Architecture® system. These controllers include integrated safety, and use the same programming software, network protocol, and information capabilities as all Logix controllers. This provides a common development environment for all control disciplines. Consistent tools and features help users to lower engineering investment costs, ease diagnostics and troubleshooting, and speed up time to market for small to mid-size applications.

Features

  • Ideal for small, to mid-size applications that require low axis motion and I/O point counts
  • Offers support for Integrated Motion over EtherNet/IP™ for maximized scalability
  • Provides support for Device Level Ring (DLR) network topologies to help increase network resiliency
  • Removes the need for lithium batteries with built-in energy storage
  • Includes up to a 2-GB secure digital (SD) card for fast program save and restore
  • Offers a smaller form factor for maximized cabinet space
  • Supports up to 2 axes Kinematics for simple articulated robotics
  • Offers open socket capability that allows support for Modbus TCP as well as devices such as printers, barcode readers and servers
  • Provides ability to connect with scaled HMI options from the PanelView™ Plus portfolio to PanelView 800 graphic terminals for simple features
  • Available with conformal coating

Compact GuardLogix® Safety Controllers

  • Provides integrated safety and integrated motion in a single controller
  • Supports integrated safety up to SIL 3, PLe CAT 4

On-Machine Controllers

  • Delivers standard, safety and motion control for On-Machine ™ applications
  • Provides up to 16 axes of Integrated Motion over EtherNet/IP
  • Minimizes hardware in the control cabinet with placement directly on the machine
  • Helps protect against dust and water with IP67-rated wash down protection
  • Offers integrated safety control up to SIL 3, PLe, CAT 4 in an On-Machine version

DOWNLOAD BROCHURES


MicroLogix Control Systems

For a proven, small programmable logic controller solution, look to our MicroLogix™ family. The MicroLogix 1200 controllers provides features and options to handle extensive range of applications. The MicroLogix 1100 and 1400 controllers increase the application coverage with enhanced network communications at an affordable price.

Bulletin 1763 MicroLogix 1100 Programmable Logic Controller Systems

MicroLogix 1100 Controllers

Our Bulletin 1763 MicroLogix™ 1100 Programmable Logic Controller Systems add embedded EtherNet/IP™, on-line editing, and an LCD panel to the MicroLogix family. The built-in LCD panel shows controller status, I/O status, and simple operator messages. With 2 analog inputs, 10 digital inputs and 6 digital outputs, the MicroLogix 1100 controller can handle a wide variety of tasks.

Bulletin 1766 MicroLogix 1400 Programmable Logic Controller Systems

MicroLogix 1200 Controllers

Bulletin 1762 MicroLogix™ 1200 Programmable Logic Controller Systems are small enough to fit in tight spaces and powerful enough to accommodate a broad range of applications. Our controller is available in 24-point and 40-point versions. You can expand the I/O count using rackless I/O modules. You can build larger control systems, achieve greater application flexibility, and expand your system at a lower cost and with reduced parts inventory. A field-upgradeable flash operating system keeps you be up-to-date with the latest features.

Bulletin 1762 MicroLogix Expansion I/O

MicroLogix Expansion I/O

Our Bulletin 1762 MicroLogix™ Expansion I/O modules extend the capabilities of the MicroLogix 1100, 1200, and 1400 controllers by maximizing flexibility of the I/O count and type. The modular, rackless design enhances cost savings and reduces replacement parts inventory. Modules can be either DIN rail or panel mounted.


 

   
© JAROEN TECHNOLOGY JAREONUDOMPOL CO.,LTD